Clearance Up to 30% Off
TO FIT THE BLIND INSIDE THE WINDOW RECESS: YOU WILL NEED TO MEASURE THE FULL WIDTH & HEIGHT OF THE ‘RECESSED’ AREA (WALL TO WALL).
INSIDE RECESS MEASUREMENT
GUIDE FOR INSIDE RECESS FITTING
TO FIT THE BLIND OUTSIDE THE WINDOW RECESS. WE WILL MAKE THE BLIND TO YOUR EXACT MEASUREMENTS SPECIFIED WITH NO DEDUCTIONS.
GUIDE FOR OUTSIDE RECESS FITTING
COULD YOU PLEASE CHOOSE WHICH ONE YOU WOULD LIKE: TOP MOUNT / FACE MOUNT:
TOP MOUNT TOP MOUNTING TO AN OVERHEAD SURFACE SUCH AS THE TOP OF THE WIDOW RECESS OR THE CEILING.
FACE MOUNT FACE MOUNTING TO THE FACE OF OUTSIDE THE WINDOW FRAME.
YOU WILL NEED TO POSITION THE BRACKETS TO ALLOW FREE OPERATION. ENSURE THAT THE POSITION OF THE BRACKETS IS SUCH THAT THE ROLLER BLIND CAN OPERATE WITHOUT COMING INTO CONTACT WITH, DOOR HANDLES OR ANY WINDOW. LOOSELY POSITION BOTH BRACKETS ON THE BLIND AND POSITION IN THE WINDOW WHERE THE BLIND WILL BE FITTED. THIS WILL GIVE YOU A BETTER INDICATION OF WHERE THE BRACKETS WILL GO AND MAKE IT EASIER TO CENTER THE BLIND.
PLACE THE CONTROL SIDE BRACKET ON THE SAME SIDE OF THE BLIND AS THE CHAIN CONTROL MECHANISM. MARK THE POSITION OF THE FIRST BRACKET, MAKING SURE THAT IT IS LEVEL AND NOT TWISTED A THIS WILL STOP THE BLIND OPERATING CORRECTLY. DRILL HOLES AND FIX BRACKET INTO PLACE, USING RAW PLUGS IF FITTING TO A WALL.
INSERT ONE SIDE OF THE BLIND IN THE MOUNTED BRACKET. THEN, PLACE THE OTHER BRACKET ON THE OTHER END OF THE BLIND AND MARK ITS POSITION. ENSURE THAT THE SECOND BRACKET IS MARKED SO THAT IT IS LEVEL WITH THE FIRST. DRILL HOLES AND FIX THE BRACKET INTO PLACE, USING RAW PLUGS IF FITTING TO A WALL.
INSERT THE PIN SIDE OF THE BLIND INTO THE PIN SIDE BRACKET. THE PIN END OF THE BLIND HAS A SPRING OPERATION TO FACILITATE MOUNTING AND UN-MOUNTING THE BLIND. INSERT THE CONTROL MECHANISM INTO THE CONTROL SIDE BRACKET AS SHOWN. THE CENTRAL LUG ON THE CONTROL SIDE MECHANISM SHOULD POINT DOWNWARDS AND LOCATE INTO THE CROSS SECTION OF THE BRACKET, HOOKING IN PLACE.
ONCE INSTALLED, USE THE CHAIN AT THE SIDE TO RAISE AND LOWER THE BLIND.
THE DEVICE MUST BE INSTALLED AT MAXIMUM DISTANCE POSSIBLE FROM THE CONTROL MECHANISM TO PREVENT THE LOOPER CHAIN FROM BECOMING SLACK.
ENSURE THE CONTROL CHAIN IS INSIDE THE P-CLIP ENSURE THE CHAIN IS TIGHT AND THAT THE P-CLIP IS AT THE BOTTOM OF THE LOOP AND THAT THE CHAINS ARE ABLE TO MANOEUVRE PROPERLY. SCREW THE TENSIONING DEVICE TO THE WALL END-TO-END TO THE BLIND ENSURING THAT THE CHAIN REMAINS TIGHT. THE CHAIN WILL BE HELP PERMANENTLY TIGHT AND UNDER CONSTANT TENSION.
EXPRESSED DELIVERY
3-5 WORKING DAYS
Well, for sure, roller blinds are among the oldest of window blinds, we have nowadays. But how do they manage to be such seemingly good as a good option for 2023. There are many reasons behind this...
Read More
Well, for sure, roller blinds are among the oldest of window blinds, we have nowadays. But how do they manage to be such seemingly good as a good option for 2023. There are many reasons behind this...
Read More
Surely, roller blinds are still among the best window blinds even in 2023. And, importantly, roller blinds are not going out of fashion, anywhere soon. Although, it is certainly true that roller blinds are among the oldest of window blinds
Read More
1ClickBlinds is UK’s leading window blinds supplier. We offer perfect fit cheap vertical and roller blinds in UK with delivery all around the country. Wide range of custom fabrics are available for dimout, blackout and privacy features.
